The ioPower.Net is an 8-port Remote Power Control Master Unit with TCP/IP Support for remote access over LAN/Internet. It can be fully managed via a standard web browser interface by authorized remote clients. The ioPower.Net is integrated with a web-based power management interface and can be daisy-chained with up to a maximum of 7 units of ioPower.Net to control over a hundred of any AC-powered devices.  With security features such as industry standard 128-bit SSL and 1024-bit public key authentication, the ioPower.Net provides ultra-secure authorized internet access for remote power control anywhere anytime. RADIUS/LDAP server authentication also supported.
ioPower.Net implements a total power control of your server room devices anytime anywhere in the world. The admins no longer has to call the server room to help switch off and on the sever power ever again.
 

General Features

▪ 8-port Web-enabling Remote Power Control Unit for Remote Power Control over LAN/Internet

▪ Secured browser-based access to control AC-powered devices in server room/global data center anytime anywhere

▪ Power ON/OFF can be implemented either manually for all banks, single bank, multiple ports, single port or automatically by port-specific or outlet group-specific timer action

▪ Can be used as a standalone unit or with multiple cascaded [slave] units

▪ Allows full control of 8 AC power outlets using ASCII commands sent over a serial interface.

▪ Cascadable up to a total of 16 units (1 x master unit + 15 x slave unit) and control up to 128 AC power outlets.

▪ Numerical display to show power module bank number when in multiple cascaded application

▪ Numerical display to monitor total current loads (showing 0.0 ~ 15A max)

▪ 8 green (ON/OFF) LED indicators to show the ON/OFF status of each A/C power outlet

▪ 8 red (Alarm) LED indicators to show the state of failure of each AC power outlet

▪ "One-Touch" with delay for power ON/Off control by front-panel buttons

▪ Internal battery to retain port-specific settings

▪ 19" rack-mountable design with metal case Web management Interface

▪ Web-based Power Management Client Interface

▪ Virtual Panel for Power ON/OFF by clicking on the buttons of the virtual panel.

▪ Per-port remote power activation/deactivation based on duration/specific time point/daily-weekly recurrence timer settings

▪ Individual naming of the power outlets

▪ Outlet global setting for configurable time delay

▪ System time can be synchronized with an internet timer and time zone setting

▪ SNMP Capabilities through Network Interface

▪ Remote Flash Upgrades via Web

▪ Password protection

▪ 128-bit SSL Web Security

▪ 1024-bit RSA authentication using certificates generated by external CA

▪ LDAP authentication support

▪ User group profiling

▪ Outlet group configuration for group-wise power activation/deactivation

▪ Individual power port naming

▪ Alarm types – email, SNMP

▪ Alarm trigger – bank over current, broken relay, computer ping